Highway Peg Mounts Rev B2
The Moto Werk adjustable Highway Peg Mounts Rev. B2 for 2007- 2014 Kawasaki Versys 650 and 2009–2015 Kawasaki ER-6N are made of anodized 6061-T6 Kaiser Aircraft aluminum with all the extra weight removed (photo shows clear finish for contrast only - mounts are available in silver or black finish).
They easily attach to the existing motorcycle frame and can be mounted at either a higher or a lower setting.
Our highway pegs provide for up to 90 different angle positions. Their angle can be adjusted in 4 degree increments to find a perfect riding position for your feet. They also allow for the pegs to be folded up if your pegs come with this feature.
The Moto Werk's highway peg mounts must be installed with your own highway pegs* - the pegs are not provided as part of the mounts.
You will need to purchase pegs that come with either M10 or 3/8" bolts. Email us for different peg recommendations.
As mounted and shown in the photos, the distance from the standard front foot peg to the highway peg mounted with our mount is 17" (43 cm) forward. The highway peg (on the lower setting) is mounted 2" (50 mm) higher than the standard front foot peg, but keep in mind that the highway peg's position can be adjusted with our mount to your liking, both forward and backwards and can be mounted at either a higher or a lower setting (with 1" (25 mm) height difference between the upper and lower peg attachment hole).
As with all of our products, the Moto Werk Highway Pegs Mounts are made to the highest quality standards of design, materials, machining, testing, and hardware. Installation Instructions provided.
The highway peg mount arm's length is 7-5/8" and the distance (center to center) between the mounting holes on the arm is either 5-1/2" or 6-1/2", depending on which mounting hole you choose.
For installing our highway peg mounts on Kawasaki bikes with engine guards or crash bars that are 1.00" in diameter or on bikes with 1.00" diameter frame such as Yamaha Super Tenere, please click here.