Moto Werk
Cart 0

Highway Peg Mounts V650LT

$ 160.00

The Moto Werk adjustable Highway Peg Mounts V650LT for 2015 - 2018 Kawasaki Versys 650 are made of black anodized 6061-T6 Kaiser Aircraft aluminum with all the extra weight removed.

They were custom designed to mount to the engine brackets and precisely fit the 2015 to 2018 Kawasaki Versys 650 models.

Our highway peg mounts provide for up to 90 different angle positions and can be mounted at either a higher or a lower setting. Their angle can be adjusted in 4 degree increments to find a perfect riding position for your feet. They also allow for the pegs to be folded up if your pegs come with this feature.

The Moto Werk's V650LT highway peg mounts must be installed with your own highway pegs*  - the pegs are not provided as part of the mounts.

You will need to purchase pegs that come with either M10 or 3/8" bolts. Email us for different peg recommendations.

Please note that some crash bars*, like SW-Motech, use the same mounting holes as our clamps, so you will not be able to have both on your bike. We recommend that you confirm installation location with crash bar manufacturers, if you are not sure. If you have 27 mm (SW-Motech) crash bars installed on your bike, you can purchase our 27 mm highway peg mounts that attach to the 27 mm crash bars, instead of to the bike's frame.

As mounted and shown in the photos, the distance from the standard front foot peg to the highway peg mounted with our mount is 17" (43 cm) forward. The highway peg (on the lower setting) is mounted 2" (50 mm) higher than the standard front foot peg, but keep in mind that the highway peg's position can be adjusted with our mount to your liking, both forward and backwards and can be mounted at either a higher or a lower setting (with 1" (25 mm) height difference between the upper and lower peg attachment hole).

 As with all of our products, the Moto Werk Highway Pegs Mounts are made to the highest quality standards of design, materials, machining, testing, and hardware. Installation Instructions provided.

The highway peg mount arm's length is 7-5/8" and the distance (center to center) between the mounting holes on the arm is either 5-1/2" or 6-1/2", depending on which mounting hole you choose.

Customer Reviews

Based on 15 reviews Write a review

More from this collection